Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GGM AXA2 - Series access control
EN
Model 1: 4 Bit
The output data is provided in following
format after every key is pressed:
key
Output
in hex
0
0
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
*
A
#
B
11.2
Standalone for single door
In this mode, the device supports connecting external card reader for exiting door.
The users of Zone 1 or external can open the door by valid card or PIN.
11.3
Standalone for two doors
In this mode, users are for controlling two doors. Read valid card or input PIN of Zone 1 on this unit,
door 1 will be opened; reading valid card or input PIN of Zone 2 on this unit, door 2 will be opened.
Remark: the common card for Zone 1 and Zone 2 can only open door 1.
11.4
With external reader for two doors
In this mode, this unit is for entering door 1,and external reader is for entering door 2.
Read valid card or input of Zone 1 on the machine, door 1 will open;
read valid card or input PIN of Zone 2 on external reader, door 2 will open.
Remark: the common card for Zone 1 and Zone 2 can open door 1 on this unit,
and open door 2 on external reader.
11.5
Two units interlocked for two doors
The interlock function is mainly used in banks ,prisons,and other places where a higher level
security is required.
When and only door 2 closed, read valid card / input PIN on this machine, door 1 will open; when and
only door 1 closed, read valid card/input PIN on external reader, door 2 will open.
Remark: The valid card /PIN is only for users of Zone 1,users of zone 2 are invalid.
Output
in Binary
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
Model 2: 8 Bit
The output data is transmitted in following
format after every key is pressed:
key
Output in hex
0
0
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
*
A
#
B
12
User Manual
Output in Binary
11110000
11100001
11010010
11000011
10110100
10100101
10010110
10000111
01111000
01101001
01011010
01001011
Publicité
Table des Matières
