Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GGM AXA2 - Series access control
EN
7. When add a series cards, this unit will make the ID number and card number initial value; after adding one user, then it
will increase the ID number and card number automatically ,Until the specifi ed number of card is added.the card num-
ber must be consecutive card quantity is between 1-2000.
8. Working mode and keypad transmission format have been set before shipping, customer can change according to requi-
rement, but when device reset to factory default, the setting is still valid.
9. When users of Zone 1 is registered successfully, LED will turn green; when users of Zone 2 is registered successfully,
LED will be green fl ash.
8.
Administrator setting
Administrator setting on keypad
*
Press
8.1
Change the master code
00
Press
Note: Master Code length:6~8 digits
8.2
Set Manager card
Set manager add card
01
Press
Set manager delete card
Press
02
Note: when add the new manager card, the new one will automatically cover the old card,
only one manager card for one device
8.3
Set Anti-duress card
Set Anti-duress card for Zone 1
03
Press
Set Anti-duress card for Zone 2
04
Press
Note: when add the new anti-duress card, the new one will automatically cover the old card,
only one anti-duress card for one device
8.4
Set Anti-duress PIN
Set Anti-duress PIN for Zone 1
Press
05
Set Anti-duress card for Zone 2
Press
06
Note: 1.the 1st digit must be 1 for Zone 1
2.the 1st digit must be 2 for Zone 2
3. when set the new anti-duress PIN, the new one will automatically cover the old anti-duress PIN,
only one anti-duress PIN for one device
8.5
Delete all users
07
Press
Note: both zone 1 and zone 2 will be deleted. This is a dangerous option, so use with care.
8.6 Set administer open lock
Set administer open Lock 1
Press
51
Master code #
factory default:999999,
new code #
repeat new master code#
read manager add card
read manager delete card
read anti-duress card
(Zone 1)
read anti-duress card
(Zone 2)
8-digit duress PIN#
(Zone 1)
(Zone 2)
8-digit duress PIN#
0000 #
6
User Manual
Publicité
Table des Matières
