Av-In1/Av-In2 Controls - Audiovox VXE 3010 Mode D'emploi

AV-IN1/AV-IN2 CONTROLS

AV-In1
AV-In1 is used for playback of audio/video from an external device connected
to the unit through a 3.5mm jack located on the font panel.
AV-In2
AV-In2 is used for playback of audio/video from an external device connected
through RCA connectors located on the back of the unit.
You can connect an external audio/video device to the unit.
1. Connect the external device with an appropriate AV cable.
2. Touch the upper left corner to display the main menu.
3. Touch [Aux 1] / [Aux 2] to access external device.
NOTE: Audio/Video device must be connected to the unit using an audio/video adapter
cable that is available separately.
NOTE: Video will only play when the vehicle parking brake is engaged. The parking brake
must be connected for this feature to operate.
Figure 30. Connecting External Devices
82
Left Audio
1
Right Audio
2
Ground
3
Video
4
3.5 mm A/V Cable(not included)