Receiving A Call; Adjust Bluetooth® Settings - Audiovox VXE 3010 Mode D'emploi

3. Search for phone number from the following list:
[Phone Book]
[Call History]
[Missed calls]
[Received calls]
[Dialed calls]
Or touch the number pad directly, then touch [

Receiving a Call

By default, all incoming calls are received automaticaly.
1. If there is an incoming call, the screen will display "Incoming call...".
2. Touch the screen to select [ hang up ] or [ Answer ].
Speak into the Bluetooth® microphone.
Tip
You can select to receive calls manually by setting [Auto answer] to [OFF]
Adjust Bluetooth® Settings
1. In Bluetooth menu, touch [ Options ].
The option menu is displayed.
2. Touch on the selected option to change the setting.
∙ [Bluetooth]:
∙ [Auto connect]: To turn the "Auto Connect" function ON or OFF .
∙ [Auto answer]: To turn the "Auto Answer" function ON or OFF .
∙ [Pairing code]: To set the paring code.
∙ [Phone sync]:
Figure 26. Bluetooth® Call Log Controls
Figure 27. Bluetooth® Incoming Call Screen
To turn the "Bluetooth" function ON or OFF.
To synchronize phone book, touch [ OK ] on the sub-menu
Phonebook Synch may take several minutes to load on initial setup.
] to dial.
80