Audiovox VXE 3010 Mode D'emploi page 75

Adjusting the Fader and Balance
The user can adjust front/rear fader settings, L/R balance settings, and subwoofer levels here.
1. Enter the EQ setup mode.
2. Touch the [ ] icon in the EQ interface menu.
Figure 19. Fade-Balance Adjustment Screen
Balance
This feature is used to balance the audio output levels between the left and right side of the
vehicle. Touch the ◄ or ► icons to change the balance control settings -12 (Left) to +12 (Right).
The setting can also be changed by touching screen within the grid to move the blue sphere.
Fader
This feature is used to fade the audio output levels between the front and rear of the vehicle.
Touch the ◄ or ► icons to change the fade control settings -12 (Rear) to +12 (Front). The setting
can also be changed by touching screen within the grid to move the blue sphere.
Sub (Subwoofer)
This feature is used to reduce or increase the subwoofer sound level. Touch the slide bar ◄ or ►
icons to adjust the subwoofer volume from -12 to +12. This setting will vary depending on the input
level setting of your subwoofer amplifier.
To exit the balance-fader touch the return icon on the top left corner of the screen.
NOTE:
The EQ mode will change to 'User' automatically when you adjust the frequency value in all
modes besides 'User'.
75