Display Modes - Fm - PERFECTPRO LUNCHBOX2 Mode D'emploi

Display modes - FM

Your radio has six display modes for FM radio. These use data provided by broadcasters which is
commonly known as RDS.
The Radio Data System (RDS) is a system in which inaudible digital information is transmitted in
addition to the normal FM radio programme.
RDS offers several useful features. The following are available on your radio:
1. Press the Info button to cycle through the various modes.
a. Frequency
b. Station name
c. Programme Type
d. Radio text
e. Signal strength
f . Time
Note:
If there is no RDS data available (or if the signal is too weak), all display option will revert back to
the frequency display after 10 seconds. If RDS information of station name is available, on the other
hand, all display option will return to the station name display.
Bandwidth narrowing - AM
In order to obtain better reception of weaker AM stations, your radio has a function to narrow the AM
bandwidth to reduce high frequency noise.
1. Press and hold the Menu button to enter the setting menu.
2. Rotate the Tuning control until "AM B.W." is shown on the display. Press the Tuning control to enter
the setting.
3. Rotate the Tuning control to select "WIDE", "NORMAL" or "NARROW", then press the Tuning
control to confirm the setting.
Setting tuning step - FM/AM
1. Press and hold the Menu button to enter the menu setting.
2. Rotate the Tuning control until "FACTORY" shows on the display. Press the Tuning control to enter
the setting menu.
3. Rotate the Tuning control until 'FM X K' or 'AM X K' shows on the display. Press the Tuning control
to enter the setting.
4. Rotate the Tuning control to choose the desired FM tuning step (50 kHz or 100 kHz) or AM tuning
step (9 kHz or 10 kHz). Press the Tuning control to confirm the setting
Note:
Re-setting the AM tuning step will erase all the preset AM stations.
7
Displays the frequency of the station being listened to.
Displays the name of the station being listened to.
Displays the type of station being listened to e.g. Pop, Classic,
News, etc.
Displays radio text message such as, new item etc.
Displays a graph showing the signal strength for the station being
received.
Displays the current time.
.