Maytag MHW8000AG Guide D'utilisation page 9

Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle, options, and settings that best
fit the load being washed. Not all settings are available with each cycle, and some options cannot be used together.
NOTES:
Not all cycles and options are available on all models
n
All wash temperature selections feature a cold rinse.
n
Not all temperatures or spin speeds are labeled on the control panel.
n
Items to wash
using default
cycle settings:
Cycle:
Drain
Wet load of clothes
& Spin
Swimwear, items that Drain
need rinsing & Spin
with
Extra Rinse
Clothing, bedding Sanitize
and towels requiring
sanitization
Sturdy garments Allergen
and household items
exposed to possible
allergens
2–4 lightly soiled Overnight
Wash & Dry
synthetic garments,
athletic uniforms, or
workout wear
Power
Heavily soiled fabrics
Wash
* Steam for Stains option is only available when warm, hot or extra hot water temperature is selected.
Model: MHW8000A*
† Sanitize
n This washer has a Sanitize Cycle that is certified by NSF International, an independent, third-party testing and certification
organization. The certification verifies that the Sanitize Cycle eliminates 99.9% of bacteria typically found on clothing, bedding,
and towels. There is no carryover of bacteria between loads after the cycle is complete.
n Use the Sanitize Cycle to clean heavily soiled, colorfast fabrics. This combines an extra-high water temperature to help ensure
the removal of heavy soils and stains. It is recommended that you set your hot water heater to 120°F (49°C) to ensure proper
performance during this cycle.
n Only the Sanitize Cycle selected has been designed to meet the requirements of NSF Protocol P172 Sanitization Performance
of Residential and Commercial, family-sized clothes washer.
†† Allergen
Allergen cycle certified by NSF International, an independent, third party testing and certification organization. The certification verified that this
cycle reduced tested allergens by at least 95.0% and maintained the water temperature necessary to kill dust mites. Only the allergen cycle
has been designed to meet the requirements of NSF Protocol P351 for Allergen Reduction Performance effectiveness.
Wash Spin
Speed:
Temperature:
N/A
Max Extract™
High
Med
Low
None
Cold Max Extract™
High
Med
Low
None
Extra Hot Max Extract™
†
High
Med
Low
None
Extra Hot Max Extract™
††
Hot
High
Med
Extra Hot
Max Extract™
Hot
Warm
Cool
Cold
Extra Hot
Max Extract™
Hot
High
Warm
Med
Cool
Low
Cold
None
Soil Available
Level:
Options:
N/A
Fresh Hold
®
Delay Hrs.
Extra Heavy Fresh Hold
®
Med Delay Hrs.
Light
Extra Heavy Steam for Stains*
Med Fresh Hold
®
Light Extra Rinse
Delay Hrs.
Extra Heavy Steam for Stains*
Med Fresh Hold
®
Light Extra Rinse
Delay Hrs.
Extra Heavy Steam for Stains*
Fresh Hold
Med ®
Light
Extra Rinse
Delay Hrs.
Extra Heavy Steam for Stains*
Fresh Hold
Med ®
Extra Rinse
Light
Delay Hrs.
Cycle Details:
Use Drain & Spin to remove excess
water from the load. Spin speed can
be set to a lower setting.
Select Drain & Spin; then select Extra
Rinse to add water. The cycle includes
an extra-high-speed spin. For some
fabrics, you may wish to set the spin
speed to a lower setting.
The extra hot wash temperature
ensures sanitization. Check
recommended wash temperature
of your items.
Uses more water to flush out allergens
such as dust mites and pet dander
from normally-soiled items.
This short wash cycle has an
extra-high-speed spin followed by
intermittent tumbling and fan activation
to circulate air through the clothes.
Use this cycle for extremely soiled
garments and household items that
need additional cleaning power. This
cycle combines high-speed wash
action, medium-speed spin, and a
deep rinse to flush excess dirt from
the load.
9