Audio Source Selection; Adjusting The Volume; Adjusting The Balance - HumanTechnik Earis Mode D'emploi

Audio source selection

You have the possibility to connecting a maximum of 2 audio sources to
the transmitter, for example an analogue stereo system and a digital TV
set. Use the "Analog/Digital" input selection switch on the left side of the
receiver to select the desired audio source.

Adjusting the volume

Use the silver volume control on the front of the receiver to easily adjust the
desired volume by turning it. The LED bar indicates the set volume. A low
level of volume is indicated when only a few LEDs on the volume indicator
bar are lit. The more LEDs on the volume indicator light up, the higher the
set volume.

Adjusting the balance

The balance control allows the volume distribution between the right and
left ear. Adjust the balance so that you hear equally well in both ears.
Please note that, when using a neckloop, the balance control has no effect
as the neckloop can only reproduce sound in mono.
English 39
Earis_BA_DE_EN_F_NL_E_I_pocket180920.indd 39 20.09.2018 14:32:23