Connecting The Transmitter To An Audio Source; Connecting The Transmitter To Digital-Out (S/Pdif / Toslink) - HumanTechnik Earis Mode D'emploi

Connecting the transmitter to an audio source

Turn off the audio source before connecting the transmitter. Place the tran-
smitter near the audio source. Do not place the transmitter in the imme-
diate vicinity of thick reinforced concrete walls and other radio-transmitting
devices, as the transmission range could be reduced.
You have several possibilities to connect "earis" to a sound source (e.g. TV,
stereo set etc.).
Check the options of connection of your audio source.
Connecting options:
DIGITAL AUDIO OUT
AUDIO OUT
L
)
)
)
)
Connecting the transmitter to digital-out
(S/PDIF / Toslink)
For best audio quality, connect the transmitter to your audio source using
the Toslink optical (digital) cable.
Please note that the digital input can only transmit audio sources in PCM /
Stereo standard.
Refer to the manual of the connected audio source to learn how to set up
the digital output.
32 English
Earis_BA_DE_EN_F_NL_E_I_pocket180920.indd 32
-S/PDIF digital output (Toslink)
- RCA sockets
R
- Headphone jack
- Loudspeaker
AV
- SCART socket
20.09.2018 14:32:22