Indel B KD 50 ECOSMART Mode D'emploi page 37

KD 50 ECOSMART
TIMER OPERATION METhOD: USE
The Minibars of the K Ecosmart series are equipped with a pre-set thermostat located on the back of the
refrigerator (the temperature has already been adjusted to the correct operating levels). You can select the
duration of the cooling cycles using the remote control. When the Minibar is connected to power supply,
it automatically turns on using the mechanical thermostat functions.
Operating cycles of K Ecosmart compressor unit controlled by the electronic timer
The compressor is in operation to cool
the contents of Minibar and to freeze
ON
the eutectic plate (6 hours over 24 hour
are sufficient).
Preset programs for K Ecosmart version, in which a panel can be installed on the door
PROGRAM
P1
P2
P3
P4
OFF
Preset programs for K Ecosmart version with glass door
PROGRAM
P1
P2
P3
P4
OFF
KD 50 ECOSMART_19-03-2015
WORKING TIME
1ST CYCLE
09-12
09-13
09-14
WORKING TIME
1ST CYCLE
09-14
08-14
07-14
The compressor is Off and the cooling
energy stored in the holding plate
OFF
maintains the inside Minibar temperature.
The Minibar is completely noiseless during
the night.
AMBIENTE TEMPERATURE
2ND CYCLE
18-21
18-22
17-22
ADjUSTABLE
SWITCH ON/OFF
2ND CYCLE
17-22
17-23
17-23
ADjUSTABLE
SWITCH ON/OFF
ENGLISH
25°C
28°C
30°C
AMBIENTE TEMPERATURE
≤ 25°C
≤ 28°C
≤ 30°C
35