Explanation Of Symbols On Appliance - Profi Care PC-BMG 3018 Mode D'emploi

6. It is recommended the performance should be checked every
2 years or after repair. Please contact the service centre.
7. Clean the monitor with a dry, soft cloth or a soft cloth squeezed
well after moistened with water, diluted disinfectant alcohol, or
diluted soapsuds.
8. No component in the monitor can be serviced by the user. The
circuit diagrams, component part lists, descriptions, calibration
instructions, or other information which will assist the user's
appropriately qualified technical personnel to repair those parts of
equipment which are designated repairable can be supplied.
9. The monitor can maintain the safety and performance charac-
teristics for a minimum of 10,000 measurements or three years,
and the cuff integrity is maintained after 1,000 open-close cycles
of the closure.
10. It is recommended that the cuff should be disinfected 2 times
every week if needed (for example, in a hospital or in a clinic).
Wipe the inner side (the side that contacts skin) of the cuff with a
soft cloth moistened with ethyl alcohol (75 - 90 %) and squeezed,
then dry the cuff by airing.

Explanation of Symbols on Appliance

Symbol for "THE OPERATION GUIDE MUST BE READ"
(Symbol = white with blue background)
Symbol for „WARNING"
Symbol for "TYPE BF APPLIED PARTS"
(the cuff is a type BF applied part)
PC-BMG3018_IM
163
04.07.18