Displaying Stored Results - Profi Care PC-BMG 3018 Mode D'emploi

e. After measurement, the monitor will turn off automatically after
1 minute of no operation. You can also press the "START"
button to turn off the monitor manually.
f. During measurement, you can press the "START" button to
turn off the monitor manually.
Note:
Please consult a health care professional for interpretation of
pressure measurements.

7. Displaying Stored Results

a. After the measuring, you can review the measurements in the
current memory bank by pressing the button "MEM". Now the
LCD displays the amount of the results in the current bank.
See Fig. 7-1
b. You can also press the "MEM" button in Clock Mode to
display the stored results. The current memory bank will flash
and the amount of results in this bank will be displayed. See
Fig. 7-2 Press the "START" button to change to the other
bank. See Fig. 7-3.
Confirm your selection by pressing the "MEM" button. The
current bank will also be confirmed automatically after 5 sec-
onds with no operation.
Fig. 7-1
156
PC-BMG3018_IM
Fig. 7-2 Fig. 7-3
04.07.18