Body Posture During Measurement; Taking Your Blood Pressure Reading - Profi Care PC-BMG 3018 Mode D'emploi

2. Measuring on same wrist each time.
3. Do not move your arm, body, or the monitor during meas-
urement.
4. Stay quiet, calm for 5 minutes before blood pressure
measurement.
5. Please keep the cuff clean. Clean the cuff by wet soft cloth
and mild detergent if the cuff becomes dirty. Do not remove
the cuff from the monitor. Clean the cuff after the usage of
every 200 times is recommended.

5. Body Posture during Measurement

Sitting Comfortably Measurement
a. Be seated with your feet flat on the
floor, and don't cross your legs.
Support the back with the backrest
of the chair.
b. Place palm upside in front of you on
a flat surface such as table.
c. The middle of the cuff should be
at the level of the right atrium of
the heart.

6. Taking Your Blood Pressure Reading

a. After applying the cuff and with your body in a comfortable
position, press the "START" button. A beep is heard and
all display characters are shown for self-test. See Fig. 6-1.
Please contact the service centre if a segment is missing.
154
PC-BMG3018_IM 04.07.18