DESCRIPTION OF THE APPLIANCE
Lid cap
A.
Lid
B.
Jug
C.
Removable silicone gasket
D.
Motor unit
E.
Brush
F.
Screen
G.
CAUTION: The safety precautions are part of the appliance.
Read them carefully before using your new appliance for
the first time. Keep them in a place where you can find and
refer to them later on.
The appliance will only start if the jug is correctly positioned
on the motor unit (E) and the lid locked on the jug.
BEFORE USING YOUR APPLIANCE FOR THE FIRST TIME
• Before using your appliance for the first
time, rinse the parts that come into
contact with food (jug, lid and
measuring cap) with soapy water
CAUTION : Do not immerse the
appliance in water (neither the
motor unit nor the jug base). Never
put the motor unit (E) under running
USING YOUR APPLIANCE
• Put the appliance on a flat, stable,
heat-resistant
sources of heat or water splashes.
• Make sure the silicone gasket (D) is in
place on the motor unit (E). Position the
jug (C) correctly on the motor unit Fig. 1
and 2.
• Add the ingredients into the assembled
jug without exceeding the maximum
level indicated:
-
1750 ml max for cold preparation
-
1400 ml max for hot preparation
surface
away
Start/Stop button
H.
Program selector
I.
Pulse/Clean button
J.
Blend/Pause button
K.
Heat button
L.
Measuring cap
M.
water. Clean with a damp cloth and dry
it carefully.
The blades are extremely sharp and
not removable.
• Make sure all the packaging has been
removed
appliance.
AUTOMATIC FUNCTION:
from
How to use :
• Lock the lid on the jug and place the lid
cap in position on the lid and lock it by
rotating it. The appliance only starts up
once the jug and lid are correctly in
place.
• Plug in the blender. The product makes
a beep and the screen lights up.
• The product will be immediatly in
standby mode. At this stage you can
select a program by turning the
program selector (l). The led will turn on
on the selected program. The recipe
time information will be displayed. For
hot programs, please note that the time
indicated does not take into account
1
before
operating
EN
the