Use; Inspection; Fitting - Puritan Bennett Breeze SleepGear Guide D'utilisation

4. Optional: Thread the halo straps through the slots in the cradle
(see figure below, item 1). Then thread the halo straps through the
outrigger (item 2) or through the optional clip accessory (item 3 –
Nasal Pillows only). Engage the Velcro
Note: You may wish to try fitting the Breeze SleepGear
without the halo straps first, then add the straps if a
better fit is required. Refer to the Adjustment section
on the following page.
U s e

Inspection

Inspect the Breeze SleepGear and its components before each use
to ensure all parts are firmly connected and no visible leaks exist.

Fitting

1. Insert the Nasal Pillows into your nostrils or place the DreamSeal
over your nose.
Breeze SleepGear
Nasal Pillows - Side View

Use

E n g l i s h
®
fasteners on the straps.
5