Puritan Bennett Breeze SleepGear Guide D'utilisation page 13

• Squeeze gently to disengage the two side latches.
• Rotate the DreamSeal away from the shell.
• Disengage the lip on the bottom of the DreamSeal from the
notch on the bottom of the shell.
Caution: To avoid damaging the hoses when connecting or
disconnecting them, use the methods described in
the following instructions. Never pull on or twist the
ribbed portions of hoses. Refer to the figure below.
3. Disconnect the hose at the swivel adapter:
• Grasp each hose at its rubber cuff.
• Gently pull hoses apart.
4. Remove the vent hole insert from the DreamSeal shell. Slide your
fingernail under the end of the insert with the raised indicator
dot(s) and pull the insert up and out.
Breeze SleepGear
Cleaning
E n g l i s h
9