Puritan Bennett Breeze SleepGear Guide D'utilisation page 14

Cleaning
E n g l i s h
Caution: Do not immerse components with foam pads
attached. Do not sterilize. Do not use bleach-,
chlorine-, or aromatic-based solutions, scented oils,
or moisturizing, antibacterial, deodorizing, or
fragranced soaps to clean the nasal pillows, mask,
headgear, padding, or air tubing. Use of such
substances may cause hardening of your Breeze
SleepGear, thereby reducing the life of the product.
Caution: Do not expose the mask or tubing to direct sunlight.
Exposure to direct sunlight may cause deterioration
of the product.
5. Wash the nasal airway assembly parts in warm, soapy water as
necessary to remove dirt, body oils, cosmetics, etc. Rinse them
thoroughly in clean running water and air dry on a clean,
absorbent surface. Foam pads may be wiped with a mild soap
applied to a moist cloth.
6. To install the vent hole insert, align the indicator dot on the insert
with the dot on the shell. Press the vent hole insert into the
opening in the shell. Make sure the inner lip on the vent hole
insert is fully inserted into the shell.
7. If you are using the halo straps, release the ends and pull the
straps through the outrigger and cradle slots. The cradle may be
separated from the spine adapter for cleaning.
8. Extend the cradle (item 1) to its maximum adjustment and then
pull on the cradle more forcefully to separate it from the spine
adapter (item 2).
10 Breeze SleepGear