Adjustment - Puritan Bennett Breeze SleepGear Guide D'utilisation

Use
E n g l i s h
Caution: Avoid excessive bending of the nasal airway
assembly when putting on the Breeze SleepGear.
2. Place the cradle (back pad) below the curve at the back of
your head.

Adjustment

1. Adjust the position of the cradle on the spine so that the cradle sits
comfortably at the base of your head.
2. Place your hand on the spine and hold it firmly to the back of your
head. Adjust the length of the Breeze SleepGear with your free
hand by moving the nasal airway assembly toward your face.
Refer to the following figure.
3. Adjust the height and angle of the shell so that the Nasal Pillows or
DreamSeal device is comfortable and there are no audible leaks.
4. Optional: Use the halo straps, if needed, to add stability and
enhance the fit of the Breeze SleepGear.
6 Breeze SleepGear