Assembly - Puritan Bennett Breeze SleepGear Guide D'utilisation

Assembly

E n g l i s h
A s s e m b l y
Before using the Breeze SleepGear for the first time, assemble it as
follows:
1. Insert the nasal airway assembly (item 1) into the SleepGear
assembly spine adapter (item 2). The hose guide slides back and
forth in the spine adapter with a ratcheting sound.
2. Nasal Pillows airway configuration: While pinching the Nasal
Pillows between the thumb and forefinger, insert the Nasal Pillows
into the shell holes with a gentle rotating motion.
3. DreamSeal airway configuration: Perform the following steps and
refer to the figure on the next page.
• Attach the DreamSeal to the shell by inserting the lip on the
bottom of the DreamSeal into the notch on the bottom of the
shell.
• Place your thumb and forefinger on the two raised circles on the
DreamSeal.
• Rotate the DreamSeal toward the shell and squeeze gently to
engage the two side latches.
4
a
Breeze SleepGear