Specific Safety Instructions; Instructions For Use; Placement Tool; Assembly - stayer TH600 Instructions D'emploi

The drill is designed for drilling holes into wood, iron,
non-ferrous metals and rock using the appropriate bits.
1. Contents
2.Specific safety instructions........................................9
3.Instructions for use......................................................9
3.1 Placement Tool...............................................................9
3.2 Assembly........................................................................9
3.3 Electrical connection.............................................10
3.4 Illustrated description............................................10
4.Operating instructions..............................................10
4.1 Placement and testing..........................................10
4.2 Tool change..........................................................11
5.Maintenance and service instructions.....................11
5.1 Cleaning...............................................................1 1
5.2 Repair service.......................................................11
5.3 Warranty...............................................................11
5.4 Disposal and recycling..........................................11
6.Regulations................................................................12
6.1 Technical Data......................................................12
6.2 EU declaration of conformity.................................12

2. Specific safety instructions

Wear hearing protection. Exposure to noise can cause
hearing loss.
Always use the auxiliary handle supplied with the
machine. Loss of control can cause personal injury.
Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility company
for assistance. Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property
damage or may cause an electric shock.
Hold the power tool only by the insulated gripping
surfaces when performing an operation where the
cutting tool may contact hidden wiring or its own cord.
Contact with a "live" wire will also make exposed metal
parts of the power tool "live" and shock the operator.
When working with the machine, always hold it firmly
with both hands and provide for a secure stance. The
power tool is guided more secure with both hands.
Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure than by
hand.
Do not work materials containing asbestos. Asbestos is
considered carcinogenic.
Take protective measures when dust can develop
during working that is harmful to one's health,
combustible or explosive.
Example: Some dusts are regarded as carcinogenic. Wear
a dust mask and work with dust/chip extraction when
connectable.
ENGLISH
9
Keep your workplace clean. Blends of materials are
particularly dangerous. Dust from light alloys can burn or
explode.
Always wait until the machine has come to a complete
page
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
Never use the machine with a damaged cable. Do not
touch the damaged cable and pull the mains plug when
the cable is damaged while working. Damaged cables
increase the risk of an electric shock.
"Caution - Read the operating instructions to
reduce the risk of inquiry"
Wear ear-muffs. The impact of noise can cause
damage to hearing.
Wear a breathing mask.
Dust which is injurious to health can be generated
when working on wood and other materials.
Never use the device to work on any materials
containing asbestos!
Wear safety goggles.
Sparks generated during working or splinters, chips
and dust emitted by the device can cause loss of
sight.

3.Instructions for use

3.1 Placement Tool

Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
The equipment is to be used only for its prescribed purpose.
Any other use is deemed to be a case of misuse. The user /
operator and not the manufacturer will be liable for any
damage or injuries of any kind caused as a result of this.
Please note that our equipment has not been designed for
use in commercial, trade or industrial applications. Ou r
warranty will be voided if the machine is used in
commercial, trade or industrial businesses or for equivalent
purposes.

3.2 Assembly

Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
Before any work on the machine itself, pull the
mains plug.
Fitting the additional handle (Fig. 2-3/Item 7)
The additional handle 7 enables you to achieve better
stability whilst using the hammer drill. Do not use the tool
without the additional handle.
The additional handle 7 is secured to the hammer drill by a
clamp. During the handle clockwise tightens this clamp.
Turning it anti-clockwise will release the clamp.
9