Maintenance And Care - Batavia GIRAFFE Air BT-TL006 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Extending the telescopic ladder – extend to its
full length –
1. Place the telescopic ladder on solid and level
ground.
2. Stabilize the telescopic ladder with one foot on
the lowest rung and start extending the
telescopic ladder at the top rung to fully extend
it. Extend one rung at a time until all rungs are
extended and the total length is obtained.
Please note that, while extending the telescopic
ladder beginning with the top rung, the ladder is
not locked and retracts if not all rungs are
extended.
Retract telescopic ladder
Always take great care when retracting the
telescopic ladder.
1. Place the telescopic ladder on solid and level
ground.
2. Press the unlocking buttons towards the
centre to retract the telescopic ladder, as
shown in the illustration.
Start retracting the telescopic ladder at the
highest rung you can reach, if the telescopic
ladder was extended to its full length.
You can retract the remaining telescopic ladder
either a rung at a time or press the next to last
unlocking buttons (on the second rung from the
bottom). This retracts all remaining rungs.
7062055 Ma-5Tlg # 1501-07.indd 9
Ensure that your Arms and fingers are in line with
the unlocking buttons (dotted line), when
retracting the ladder.

Maintenance and care

Always keep the telescopic ladder clean.
Remove dirt, abrasive dust, paint, glue, etc.
after every use, before retracting the
telescopic ladder. Dirt can affect the proper
functioning. Always wipe the rungs clean.
Clean the telescopic ladder with a broom or a
cloth. Thoroughly dry the rungs if the
telescopic ladder gets wet.
To prevent surface damage always protect the
plastic end caps from dirt and abrasive dust,
etc.
Leave repair and maintenance work to
competent staff.
EN
9
15-01-15 09:25

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

7062055

Table des Matières