Retracting The Ladder; Cleaning And Maintenance - Batavia GIRAFFE AIR Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

F).
Keep in mind that the locking
devices of the ladder only lock
when you have extended the lad-
der to its total length.
4. Make sure that each and every
ladder section is locked before
you climb onto the ladder (see
section "Locking device").

Retracting the ladder

If you activate the lowest
unlock keys (on the sec-
ond rung from below), all
rungs of the above ladder section
are automatically unlocked and
retracted. If you begin with one of
the upper rungs, this only unlocks
the rungs above it and the rungs
below must be unlocked separately.
1. Make sure that the ladder stands
on a solid and level ground.
2. When retracting the ladder
ensure that your fingers, hands
and arms are at the height of the
actuated unlock keys 
3. Push both unlock keys of a rung
towards the centre so that the
red area below becomes visible.
(see fig. G).
The locking device unlocks and
the remainder of the ladder
above the rung is retracted.

Cleaning and maintenance

Risk of injury!
contaminated, you can easily slip or
fall off the ladder and injure
yourself.
– Keep the ladder clean. Remove
– Always wipe the rungs off.
– Leave repair and maintenance
Risk of damage!
Improper cleaning can lead to
damage.
– Do not use any aggressive
.
1
– Keep the protective caps and the
– Clean the ladder with a brush or
WARNING!
There is a risk of injury
with incorrect handling.
If rungs or beams are
contaminates, such as, e.g. dirt,
paint residues etc., after each
use and before retracting the
ladder.
work to be carried out exclusively
by experts.
NOTICE!
cleaners, brushes with metal or
nylon bristles or sharp or metallic
cleaning utensils such as knives,
hard scrapers and the like. They
could damage the surfaces.
non-slip caps of the support foot
free from dirt, abrasive grit and
so forth. This could damage the
surface.
English
15

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bt-tl009

Table des Matières