For Best Results - Faber NEW CRISTAL CRIS36SS300 Instructions D'installation

For Best Results

Start the rangehood several minutes before cooking to develop proper airflow. Allow the
rangehood to operate for several minutes after cooking is complete to clear all smoke and
odors from the kitchen.
1
15/32"
1
15/32"
3/4"
10
USE AND CARE INFORMATION
USE AND CARE INFORMATION
Rangehood Control Panel USE AND CARE INFORMATION
All controls are located on the right side of the rangehood.
Rangehood Control Panel
Light On/Off Switch
All controls are located on the right side of the rangehood.
TheOn/Off switch for the halogen light is located behind the
Light On/Off Switch
front trim. Moving the switch to the 1 Position turns the light
On. Moving the switch to the 0 position turns the light off. TheOn/Off switch for the halogen light is located behind the
front trim. Moving the switch to the 1 Position turns the light
Blower Speed Switch
On. Moving the switch to the 0 position turns the light off.
B in FIGURE 10 shows the speed control switch for the
Blower Speed Switch
blower. Moving the switch to the 1 Position turns the blower
B in FIGURE 10 shows the speed control switch for the
on LOW. Moving the switch to the 2 Position turns the blower
on MEDIUM. Moving the switch to the 3 Position turns the blower. Moving the switch to the 1 Position turns the blower
blower on HIGH. Moving the switch to the 0 Position turns on LOW. Moving the switch to the 2 Position turns the blower
the blower off. on MEDIUM. Moving the switch to the 3 Position turns the
blower on HIGH. Moving the switch to the 0 Position turns
Automatic Operation
the blower off.
As long as the blower and light switches are on, the blower
Automatic Operation
and light will automatically operate when the visor is opened
and shut off when the visor is closed. As long as the blower and light switches are on, the blower
and light will automatically operate when the visor is opened
For Best Results
and shut off when the visor is closed.
Start the rangehood several minutes before cooking to develop
For Best Results
proper airflow. Allow the unit to operate for several minutes
after cooking is complete to clear all smoke and odors from Start the rangehood several minutes before cooking to develop
FIGURE 10
FIGURE 10
B
B