Tassimo Careline - Bosch TASSIMO JOY TAS 43 Série Mode D'emploi

Masquer les pouces Voir aussi pour TASSIMO JOY TAS 43 Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 36
32
Problem
The appliance does not
recognise the inserted
T DISC and remains in
stand­by mode or the
F
Status LED
lights up
red.
The quality of the foam /
crema has deteriorated.
Brewing unit cannot be
securely closed.
Brewing unit cannot be
opened.
Water dripping from the
brewing unit.
Robert Bosch Hausgeräte GmbH
Possible!cause
Appliance is not switched
on.
No T DISC inserted.
The barcode could not be
detected.
The brewing system is
not properly closed.
The drink outlet is
clogged or dirty.
The appliance needs
descaling.
T DISC Piercing unit
or T DISC holder is not
properly inserted.
The T DISC is not in­
serted properly.
The brewing unit is not
properly closed.
The brewing unit is still
locked.
The T DISC is damaged
or leaky.
The piercing unit is
either not inserted or not
inserted properly.
Solution
Make sure the appliance is
switched on before inserting a
T DISC.
Check if T DISC has been inserted.
Clean the T DISC barcode reading
window and try again or smooth
the barcode on the T DISC out with
your thumb.
Use another T DISC.
If problems persist contact the

TASSIMO careline.

Clean the brewing system
thoroughly, especially in the area of
the clamp.
Remove the drink outlet from the
brewing unit and detach the pierc­
ing unit. After cleaning everything
thoroughly, reassemble the parts
and replace them in the brewing
unit.
Clean the brewing unit with the
Service T DISC.
Descale the appliance (for details
see "Descaling").
Insert T DISC holder or T DISC
piercing unit properly.
Re­insert the T DISC and make
sure it is properly positioned.
Push the handle down until it snaps
into place with an audible click.
Clean the brewing system thor­
oughly, especially in the area of the
clamp.
Wait until the Status LED
stopped blinking before attempting
to open the brewing unit.
Stop the brewing process. Wait
until the machine is cooled down
before removing the T DISC and
then clean the brewing unit
Check to ensure that the piercing
unit is inserted properly.
en
F
has

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Tas 43 série

Table des Matières