Intended Use; Product Features; Technical Data; Noise/Vibration Information - Bosch PSR Expert+ LI-2 Ergonomic Notice Originale

OBJ_BUCH-3017-001.book Page 14 Monday, August 29, 2016 12:57 PM
14 | English

Intended Use

The power tool is intended for driving and loosening screws
and for drilling in wood, metal, ceramic and plastic. The PSB
is additionally intended for impact drilling in brick, masonry
and stone.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Keyless chuck
2 Torque presetting ring

Technical Data

Article number
Rated voltage
No-load speed
– 1st gear
– 2nd gear
Impact frequency at no-load
Max. torque for hard/soft screwdriving
application according to ISO 5393
Max. drilling dia.
– Steel
– Wood
– Brickwork
Max. screw dia.
Chuck clamping range
Drill spindle thread
Weight according to EPTA-Procedure 01:2014
Permitted ambient temperature
– during charging
**
– during operation and during storage
Recommended batteries
Recommended chargers
– PBA 18V....V–.
– PBA 18V....W–.
* depending on the battery pack being used
** Limited performance at temperatures <0 °C

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-1.
Typically the A-weighted sound pressure level of the product
is 74 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
1 609 92A 3GW | (29.8.16)
3 Operating mode preselection ring
+
(PSB Expert LI-2 Ergonomic)
4 Gear selector
5 On/Off switch
6 Rotational direction switch
7 Battery unlocking button
8 Battery charge-control indicator
9 Battery pack*
10 "PowerLight"
11 Handle (insulated gripping surface)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Cordless Drill/Driver
+
PSR Expert LI-2 Ergonomic
3 603 JB0 1..
V=
-1
min 0 – 430
-1
min 0 – 1400
-1
min
Nm 32/28*
mm
mm
mm
mm
mm 1.5 – 13
1/2"
kg
°C 0...+45
°C –20...+50
PBA 18V....V–.
PBA 18V....W–.
AL 22.. CV
AL 18.. CV
AL 18.. CV
Vibration total values a
h
determined according to EN 60745-2-1:
Drilling into metal: a =2.5 m/s
h
Impact drilling into concrete: a
Screwdriving without impact: a
Combination Cordless Drill
+
PSB Expert LI-2 Ergonomic
3 603 JB0 3..
18 18
0 – 430
0 – 1400
– 0 – 22500
32/28*
13 13
38 38
– 11
10 10
1.5 – 13
1/2"
1.2 1.3
0...+45
–20...+50
PBA 18V....V–.
PBA 18V....W–.
AL 22.. CV
AL 18.. CV
AL 18.. CV
(triax vector sum) and uncertainty K
2 2
, K=1.5 m/s
2 2
=17 m/s , K=2.0 m/s
h
2 2
=2.5 m/s , K=1.5 m/s
h
Bosch Power Tools