Publicité
Les langues disponibles
Les langues disponibles
English
Accepting a door call
The ringing tones for the front
door and apartment door are
different. When a visitor presses
the door bell, the telephone rings
and the mute button flashes.
The call can be accepted within 1
minute of the last ring tone.
Actuating the door release
When you press the door release,
the door from which the last call
came is opened for 3 seconds.
Switching on the light
When you press the light button,
the lighting is switched on,
provided this has been connected
by your electrical installer.
Muting the bell
When the mute button is pressed
briefly, all the ringing tones are
switched off or on again. The
button lights up red to indicate
that the mute has been activated.
If a visitor rings the door bell while
the telephone is switched to mute,
the button flashes.
Ring tone volume
The ring tone volume can be
changed with a potentiometer
under the inscription insert.
(Illustration page 7)
Key assignment
The function of the buttons
depends on how the telephone
has been configured. For further
information, please contact your
electrical installer.
Care of your phone
Only ever clean your telephone
using a soft cloth dampened with
mild soap solution. Dry cleaning,
aggressive cleaning agents and
abrasives can damage the surface.
Servicing
Statutory warranty conditions
apply. Exchange of the device in
case of servicing must be
performed by your electrical
installer.
Individual programming
Individual functions for the
instrument can be documented
on page 6.
3
Publicité
