4.3 Cleaning of shelf
Upper end of fixed leg
Lower end of fixed leg
(The picture above is only for reference.The actual configuration will depend on the physical
product or statement by the distributor)
Please dismantle the cantilever shelf in the direction of the arrows shown as above :
❶
please hold the front edge of shelf, and tilt the shelf upwards until the lower end of fixed leg is
separated from the slot of supporting bracket;
❷
Lift the whole shelf until it stops;
❸
take out the shelf by pulling it forward.
When installing a shelf, put the upper end of the shelf into one of the upper slots of the support bracket
first and then put the lower end of the shelf into the third slot lower of the support bracket.
4.4 Cleaning of freezer lower drawer
Pull out the lower freezer drawer to the proper position.
As shown in the Fig., press the buttons in both slots respectively(must press both sides at the
same time), pull out the freezer drawer until it stops.
Take out the lower drawer as directed by the arrows.
After cleaning, put back the drawer to original position, then close the lower drawer, the button
will lock the drawer automatically.
Note:Don't remove the lower freezer drawer if not necessary.
button
15
❸
❶ ❷
12
Slot