Installation And Adjustment; Tools; Manner Of Delivery - Vermeiren Bobby Mode D'emploi

To transport the transferchair in the car use following steps:
1. Remove footrests and accessories.
2. Store footrests and accessories safely.
3. Fold the transferchair.
4. Place the transferchair in the luggage place.
5. If the transferchair and the passenger compartment is NOT separated, attach the
frame of the transferchair securely to the vehicle. You can use the available safety
belts in the vehicle.
3

Installation and adjustment

The instructions in this chapter are for the specialist dealer.
The Vermeiren transferchairs Bobby has been designed for short trip and easily transfer.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility.
A list of Vermeiren facilities can be found on the last page.
L
WARNING:
Risk of unsafe settings - Use only the settings described in this
manual.
L
WARNING:
Variation of allowed adjustments can still change the stability of your
transferchair (tilt back or sideways).
3.1

Tools

To set up the transferchair the following tools are needed.

Wrench set n° 10

Allen key set n° 4
3.2

Manner of delivery

The Vermeiren Bobby shall be delivered with:

1 frame with armrests, rear and front wheels

1 pair footrests

Handgrips + brake levers

Back and seat cushion

Tools

Manual

Accessories (optional)
Before use check if everything is included and that no products are damaged (example by
transport, ...).
Page 12
Bobby
2015-02