Intended Use; Product Features; Technical Data - Bosch GKS Professional 85 Notice Originale

OBJ_BUCH-293-006.book Page 16 Wednesday, July 20, 2011 4:24 PM
16 | English

Intended Use

The machine is intended for lengthways and crossways cut-
ting of wood with straight cutting lines as well as mitre cuts in
wood while resting firmly on the workpiece. With suitable saw
blades, thin-walled non-ferrous metals, e. g., profiles, can al-
so be sawed.
Working ferrous metals is not permitted.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Blade guard
2 Lock-off button for On/Off switch
3 On/Off switch
4 Auxiliary handle (insulated gripping surface)
5 Spindle lock button
6 Scale for mitre angle
7 Wing bolt for parallel guide
8 Wing bolt for bevel-angle preselection
9 Cutting mark, 0°
10 Cutting mark, 45°
11 Parallel guide*
12 Retracting blade guard
13 Riving knife (GKS 85 G)

Technical Data

Circular Saw
Article number
Rated power input
No-load speed
Rotational speed under load, max.
Cutting depth, max.
– for 0° bevel angle
– for 45° bevel angle
Spindle lock
Constant electronic control
Reduced starting current
Base plate dimensions
Saw blade diameter, max.
Saw blade diameter, min.
Blade thickness, max.
Tooth thickness/setting, max.
Tooth thickness/setting, min.
Mounting bore
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
1 619 P09 555 | (20.7.11)
14 Base plate
15 Lever for retracting blade guard
16 Wing bolt for bevel-angle preselection
17 Sawdust ejector
18 Handle (insulated gripping surface)
19 Allen key
20 Clamping bolt with washer
21 Clamping flange
22 Saw blade*
23 Mounting flange
24 Saw spindle
25 Screw for attachment of riving knife (GKS 85 G)
26 Extraction adapter*
27 Fastening screw for extraction adapter (GKS 85)*
28 Clamping lever for cutting-depth preselection
29 Cutting-depth scale
30 Set of screw clamps*
31 Guide rail*
32 Connection piece*
33 Vacuum hose*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GKS 85
Professional
3 601 E7A 0..
W 2200
-1
min 5000
-1
min 3500
mm
mm
mm 383 x 170
mm 235
mm 230
mm 2.2
mm 3.2
mm 2.0
mm
kg 7.5
GKS 85 G
Professional
3 601 E7A 9..
2200
5000
3500
85 85
65 65
–
406 x 208
235
230
2.2
3.2
2.0
30 30
7.8
/ II / II
Bosch Power Tools