Viking GE 345 Manuel D'utilisation page 28

Notes on maintenance and care
Important information on mainten -
ance and care of the product group
Electric garden shredders
Please always observe the following
important information for the prevention
of damage or excessive wear to your
VIKING appliance:
1. Wearing parts
Some parts of the VIKING appliance are
subject to normal wear even when used
properly and must be replaced in due
time depending on type and duration of
use.
These include:
- Blades
- Blade disc
12 12
2. Observance of the information in
this instruction manual
The VIKING appliance must be used,
maintained and stored with the care
described in this instruction manual. Any
damage caused by non-observance of
the safety, operating and maintenance
instructions are the sole responsibility of
the user.
This applies in particular to:
- power lead with inadequate dimen-
sions (cross section)
- incorrect electrical connection
(voltage)
- product modifications not approved
by VIKING
- the use of tools or accessories which
are not approved or suitable for the
appliance, or are of inferior quality.
- improper use of the product
- use of the product for sporting or
competitive events
- resultant damage due to continued
use of the product with defective
components
3. Maintenance operations
All work listed in the section
"Maintenance" must be performed
regularly. If these maintenance
operations cannot be carried out by the
user himself, a specialist dealer must be
commissioned to do it.
VIKING recommends that you have
maintenance operations and repairs
performed exclusively by a VIKING
specialist dealer.
VIKING specialist dealers regularly
attend training courses and are provided
with technical information.
If these operations are neglected, faults
may arise which are the responsibility of
the user.
These include:
- damage to the drive motor as a result
of inadequate cleaning of the cooling
air guide (inlet slots)
- corrosive and other resultant damage
caused by incorrect storage
- damage to the appliance through the
use of inferior-quality spare parts.
- damage due to untimely or
inadequate maintenance or damage
due to maintenance or repair work
not performed in the workshops of
specialist dealers.
0478 215 9921 B - EN