Polar Refrigeration CK640 Mode D'emploi page 14

UK
Troubleshooting
If your POLAR appliance develops a fault, please check the following table before making a call to the
Helpline or your POLAR dealer.
Fault
The appliance is not
working
The appliance is
leaking water
The appliance is
unusually loud
Technical Specifications
Model Voltage
CK640 230V~ 50Hz
14
CK640_ML_A5_v3_20190925.indb 14
Probable Cause
The unit is not switched on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
The appliance is not properly
levelled
The discharge outlet is blocked
Movement of water to the drain is
obstructed
The water container is damaged
The appliance has not been
installed in a level or stable
position
Loose nut/screw
Power Current Capacity
500W 4A 3 x GN 2/3
Solution
Check the unit is plugged in correctly and
switched on
Call POLAR agent or qualified Technician
Replace the fuse
Check power supply
Call POLAR agent or qualified Technician
Adjust the screw feet to level the appliance
(if applicable)
Clear the discharge outlet
Clear the floor of the appliance (if
applicable)
Call POLAR agent or qualified Technician
Check installation position and change if
necessary
Check and tighten all nuts and screws
Dimensions
Refrigerant
H x W x D
420 x 660 x 650 R290
Weight
(kg)
42
2019/9/25 13:40