Building-In - Kuppersbusch IKE 150-2 Instructions De Montage Et D'emploi

Building-in

Dimensions of the recess
Height of housing (1)
880
Depth of housing (2)
550
Width of housing (3)
560
It is necessary that the niche is provided with a
conduct of ventilation
dimensions:
Depth 50 mm
Width 540 mm
For appropriate venting, follow indications in the
figure.
1225 mm
550 mm
560 mm
having the following
1. Fit the appliance in the niche by making sure that
it stands against the interior surface of the unit on
the side where the door hinges of the appliances
are fitted. Insert the appliance until the upper
strip butts up against the unit (1) and make sure
that the lower hinge is in line with the surface of
the unit (2).
2. Open the door and push the appliance against
the side of kitchen furniture opposite to that of
the appliance hinges. Fasten the appliance with
4 screws (I) provided in the kit included with the
appliance.
3. Press in the joint covers between the appliance
and the kitchen
furniture.
GB
27