Use And Control / Before Use / Starting The Appliance / Temperature Control; Internal Parts - Kuppersbusch IKE 150-2 Instructions De Montage Et D'emploi

GB
Before Use
Wait two hours before connecting the appliance to
allow the oil to flow back in the compressor.
Before using the appliance for the first time, wash the
interior and all internal accessories with lukewarm water
and some neutral soap so as to remove the typical
smell of a brand-new product, then dry thoroughly.
Do not use detergents or abrasive powders,
as these will damage the finish.
Remove safety elements used for transportation.
Starting the appliance
Insert the plug into the wall socket and turn the
thermostat knob clockwise beyond position «O»
(OFF).
The thermostat control situated inside the fridge
compartment regulates the temperature of the
appliance.
Turn the thermostat control to the required setting.
Temperature Control
The following effects are of significance in respect
of the interior temperature:
Ambient temperature
Quantity and temperature of the food stored;
Frequency with which the door is opened and how
long it is left open
the location of the appliance.
The temperature
automatically adjusted.
Setting "1" = hightest temperature, warmest
setting
Setting "6" = lowest temperature, coldest setting.
Setting " " = Off
A medium setting is generally the most suitable.
20
Use and Control
inside the appliance

Internal Parts

Storage shelves
The shelves can be removed for cleaning.
To permit storage of food packages of various
sizes, the shelves can be placed at different
heights.
To remove the internal shelf pull forward until it
can be tipped up or down and removed.
Please do the same in reverse to insert the shelf
at a different height.
The glass shelf above the vegetable drawers
and the bottle shelf should always remain in
position, to ensure correct air circulation.
Door shelves
To permit storage of food packages of various
sizes, the central door shelf can be adjusted in
height.
Gradually pull the shelf in the direction of the
arrows until it comes free, then reposition as
required.
For more thorough cleaning, the top and bottom
door sheves can be easily removed and refitted
in position.
is