Door Reversal; Building-In - Kuppersbusch IKE 247-8 Instructions De Montage Et D'emploi

Door reversal

The applianceÕs door has been locked in position for
transport by means of pins on both sides. According
to the door opening direction, remove relevant pins
at the top and at the bottom.
A
B
D163

Building-in

Dimensions of the recess
IKE 167-7
Height of housing (1) 880
Depth of housing (2)
Width of housing (3)
PR0
It is necessary that the niche is provided with a
conduct of ventilation having the following
dimensions:
Depth 50 mm
Width 540 mm
IKE 247-8
1225
550 550
560 560
3
1
2
Warning!
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fitting
of the gasket or accelerate this process by
heating up the part involved with a normal
hairdrier.
1. Slide the appliance into the recess, pushing it
against the wall on the handle side.
mm
mm
mm
2. Apply joint the sealing strip as shown in figure.
A
D022
D132
17