Projection Unit; Infrared Sensor Operation - Magnasonic MM178K Guide De L'utilisateur

PROJECTION UNIT

1. Press the PROJECTION ON / OFF button on the side of the unit to turn the
projection on.
2. The projection will display the time on the wall or ceiling in a darkened room.
3. Optimal display distance is between 3 and 9 feet.
4. To focus the display, adjust the FOCUS ADJUSTMENT wheel on the side of the
unit.
5. To flip the image, PRESS the PROJECTION TIME 180° FLIP button and the
display will be flipped upside down.
6. To turn off the projection, press the PROJECTION ON / OFF button on the side
of the unit.

Infrared Sensor Operation

1.
In radio off mode, hold you hand above the sensor for one second to display the
alarm 1 and 2 time
2. In radio on mode, hold your hand above the sensor for 2 seconds to turn on the
sleep function, the word SLP will appear on the display. To adjust the sleep time,
see the Sleep Function section on Page 5. Press the ON / OFF button to cancel
the sleep timer.
3. When alarm is sounding, hold your hand above the sensor for 1 second to turn
the SNOOZE function on, the alarm will sounds again in 9 minutes.
.
- 8 -