Elem Garden Technic SCEE16002B Traduction Des Instructions D'origine page 31

Troubleshooting
Problem
Motor does not start
Abnormal noises
Abnormal vibrations
Poor scarification results
Possible causes
No electricity
Defective cable
Defective safety switch/plug combination
Overheat protection actived
Cylinder is jammed
Cogged belt slipping
Loose bolts, nuts or other securing
components
Cutting blades damaged or worn
Working depth too large
Grass too long
Working depth too small
Worn blades
Ejector channel blocked
Made in China
Remedy
Check mains connection
Check cable, plug in, replace if required, or have it repaired by
a qualified person
Arrange for repair in a specialist workshop
1. Working depth too large, set to the shorter depth
2. Cylinder blocked, remover the blockage
3. Grass too long, mow the lawn before operation
wait till the motor cool down for around 15 minutes before
rework
Switch off wait till complete stop. Remove the objects
Arrange for repair in a specialist workshop
Tighten all components, contact specialist workshop if noises
prevail
Replace a new cylinder or have it checked by an specialist
workshop
Set to correct working depth
Mow the lawn before aerating
Set to large working depth
Replace a new cylinder or have it checked by an specialist
workshop
Empty collection bag and remove blockage
2015
31