How Do I Print The Printer Information Pages; How Do I Test My Printer - HP Designjet 130 Guide De Référence Rapide

HP Designjet 130/130nr Printer - Quick Reference Guide

How Do I Print the Printer Information Pages?

Before you begin, make sure there are at least three sheets of blank paper in
the input tray (A4- or Letter-size is sufficient).
While holding the Power key down, press the OK key (upper right key) four
times. Three pages with information about the printer and its peripherals will be
printed.

How Do I Test My Printer?

When you have set up your printer and periodically after maintenance, you
may want to do a test print to check the printer configuration is working and that
the print quality is good.
To do a test print...
Before starting this procedure, make sure that you have a blank sheet of A4 or
Letter paper, or a roll of paper at hand.
1. Run the HP Designjet System Maintenance utility as described in "How Do I
Use HP Designjet System Maintenance?" on page 22.
2. Select Check image quality.
3. Follow the on-screen instructions.
23