Transport And Handing; Installation - Signature SFDOOR5302XAQUA Instructions D'utilisation

TRANSPORT AND HANDING

When transportation, hold the base and lift the
refrigerator carefully with an angle inferior at
45 degree. Never hold the door handle as
support. Never place it upside down nor
horizontally. Push refrigerator on its basis and
place it thanks to its roller feet.

INSTALLATION

To fix stably, the appliance must be placed on
a flat and solid surface. It should not be laid on
any soft material.
Choose a location where there is no heat
source. Keep the refrigerator away from direct
sunlight or other appliance producing heat.
Choose a dry and well-ventilated place where
there is no corrosive air.
In order to improve efficiency of the cooling
system and save energy, it is necessary to
maintain good ventilation around the
appliance for the dissipation of heat. For this
reason, sufficient clear space should be
available around the refrigerator. Suggest: It is
advisable for there to be at least 100mm of
space from the back to the wall, at least
100mm from its top. The sides please refer to
below diagram. A clear space is in front to
allow the doors to open 132°.
-41-