Transport And Handing; Installation; Test - Signature SRB4003A+X AQUA Instructions D'utilisation

TRANSPORT AND HANDING

When transportation, hold the base and lift the
refrigerator carefully with an angle inferior at
45 degree. Never hold the door handle as
support. Never place it upside down nor
horizontally. Push refrigerator on its basis and
place it thanks to its roller feet.

INSTALLATION

To fix stably, the appliance must be placed on
a flat and solid surface. It should not be laid on
any soft material.
Choose a location where there is no heat
source. Keep the refrigerator away from direct
sunlight or other appliance producing heat.
Choose a dry and well-ventilated place where
there is no corrosive air.
In order to improve efficiency of the cooling
system and save energy, it is necessary to
maintain good ventilation around the
appliance for the dissipation of heat. For this

TEST

reason, sufficient clear space should be
available around the refrigerator. Suggest: It is
advisable for there to be 100mm of space
from the back to the wall, at least 100mm from
its top,at least 100mm from its side to the wall
and a clear space in front to allow the doors
to open 135°. As show in following diagram.
-36-