Personnel Qualification; Skilled Personnel - WIKA A-1200 Mode D'emploi

3. Safety

3.3 Personnel qualification

Skilled personnel

Skilled personnel, authorised by the operator, are understood to be personnel who, based on their technical training,
EN
knowledge of measurement and control technology and on their experience and knowledge of country-specific regula-
tions, current standards and directives, are capable of carrying out the work described and independently recognising
potential hazards.
3.4 Use of accessories and spare parts
It is recommended to use original accessories and original spare parts from WIKA. Using accessories and spare parts
from third parties can lead to damage to the instrument or accidents, due to quality defects or other reasons.
WIKA assumes no liability for damage or accidents caused by a malfunction or unsuitability of accessories and spare
parts which do not originate from WIKA (e.g. non-compliance with the IP ingress protection of connectors). No warranty
claims can be made which arise due to a malfunction or unsuitability of any accessory or spare part from a third party.
3.5 Labelling, safety marks
Product label
If the serial number becomes illegible (e.g. due to mechanical damage or overpainting), traceability will no longer be
possible.
A-1200



www.wika.com
IO-Link (option)

P# Product No.

S# Serial No.

Measuring range

Symbols
Before mounting and commissioning the instrument, ensure you read the operating instructions!
8
Made in Germany

Coded date of manufacture

Pin assignment and specifications

Approvals

 
WIKA operating instructions, pressure sensor, model A-1200
