Updating The Firmware - Sherwood WD-1 Guide D'utilisation

Overview of the Main Screen
1
2
3
No. Description
Move to the Wiink main menu
1
•
This menu is not displayed on the
Android smartphone.
Turn off the main unit.
(To activate the function, you should turn
on the Network Standby Control. Then, the
2
power consumption may increase. Refer to
"Setting the Network Standby Control"
on page 12 for details.)
3
Volume control bar
4
Return to the previous menu
Select or confirms a broadcast in Internet
5
Radio and Media server
6
Move to the settings menu

Updating the Firmware

6
New firmware that provides additional features
or product improvements will be released as
needed. Updates can be downloaded from our
website: www.sherwoodamerica.com.
After downloading the firmware to a USB
5
device, you can update the main unit by
connecting the USB device with a USB OTG
cable(faster than USB 2.0) and doing the
following procedures.
For details, refer to the information supplied
4
with updates. Do not perform this procedure
unless firmware update is necessary. Also,
make sure you read the information supplied
with updates before updating the firmware.
Operating Your Device
21