Network Settings Overview; Setting The Direct Wireless Network Connection; Setting The Wired Network Connection; Ethernet Configuration - Sherwood WD-1 Guide D'utilisation

Network Settings Overview

Main Menu Sub Menu
Direct
AV Set
NETWORk
CONNECT
Wired
AP Name
Resolution
OTHER
Display size
Factory Setting
Network Information
INFORMATION
Passcode Information
Setting the Direct Wireless Network
Connection
You can connect the main unit with a mobile
device wirelessly through Soft AP hotspot or
Wi-Fi direct.
Soft AP hotspot
When you enable Soft AP hotspot, you can
use the main unit as a wireless access point. It
provides internet access to network devices.
Wi-Fi direct
Wi-Fi Direct is a standard that allows Wi-Fi
devices to connect to the main unit without the
need for a wireless access point. When you
enable Wi-Fi Direct, you can directly transfer
data between Wi-Fi direct devices and the
main unit without the need for full setup.
Go to
Page
Soft AP
13
hotspot
Wi-Fi direct 13
Ethernet 13
Ethernet
13
Configuration
14
14
14
14
14
14
Setting the Wired Network
Connection
Before you setup the connection, check
that the LAN cable is connected to the LAN/
ETHERNET connector properly and securely.
For details, see "Connecting to a Network"
on page 10.
Ethernet
You can enable and set the Ethernet
connection automatically on the main unit.

Ethernet Configuration

You can set the Ethernet connection settings
manually.
Menu item
Ethernet
Inputs an Ethernet device name.
Device
Connection Sets the connection type as DHCP or
Type Static IP.
IP Address Inputs IP Address.
Inputs subnet mask when the DHCP
Netmask
function is disabled.
DNS Inputs DNS address when the DHCP
address function is disabled.
Default Inputs Default Router when the
Router DHCP function is disabled.
Note
• When you set DHCP as a connection
type, you do not need to set the IP
Address, Netmask, or DNS address etc.
• When you set Static IP as a connection
type, you should set the network
connection manually by entering the
IP Address, etc. In this case, some
knowledge of networks is required. If you
do not understand internet connections,
contact your internet service provider.
Operating Your Device
Description
13