Connecting The Myintercom Video Door Intercom; Lan Connection; Power Supply; Switch Output - Telecom Behnke myintercom Mode D'emploi

GB
Instructions for myintercom
Operation
1.9. Connecting the myintercom video door intercom

LAN connection

The LAN connection is generally in the form of an
RJ-45 plug (
individual leads directly to a terminal strip (
in accordance with EIA/TIA 568 B, the network is
connected to the terminals as follows: 3 (green-
white), 6 (green), 1 (orange-white) and 2 (orange)
whereby the number denotes the respective pin
of the RJ-45 plug or socket.

Power supply

Power is supplied to the myintercom video
door intercom via the Behnke 15V power
supply. The use of any other power supply is
not permitted.

Switch output

Potential-free output for controlling a door
opener, maximum load 24V, 2A.
12V ~ 1A output
Power supply for door opener
Switch output
Potential-free output for controlling an external
door bell (recommended), maximum load 20V, 2A
34
). It is also possible to connect the
If power supply for door opener is not available
on site:
* TÖ = Door opener
If power supply for door opener is available
on site:
);
* TÖ = Door opener

Connecting an external door bell:

Ext. door open button
(on site)
TÖ
Ext. door open button
(on site)
TÖ
Ext. door opener power
supply, Max. 24V, 2A
door bell
(on site)
bell transformer (on site)