dirna Bergstrom bycool blue line FLAT 12/24 V Instructions De Montage page 28

FLAT
EN ES
Connect cabling boxes and pipes, through the
16
rear part of the Bycool as indicated.
Place tank support on the most suitable
17
lower part of the rear area of the cab.
Mark and drill Ø 9 on the cab bearing in
mind the vertical position of the support.
Minimum (6) fastening drill holes.
Place M6 rivet nuts and fix the support
18
with M6/100x30 screws.
(*) – Where it does not lean on the even
part, place a 10mm separator and screw
M6/100 x 40.
4-way box
Pump impulsion pipe
Pipes marked with white tape
Rivet nut
28
2-way box
Return pipe
Allen screw 6/100x30
Grower washer Ø 6
Flat washer Ø 6
Supports
Tank
6/100x30
Grower washer Ø 6
Flat washer Ø 8
Support
Rear part cab
6/100x40 (*)
10 mm separator (*)
Rear part cab (*)
®