Table des Matières
Publicité
ASSEMBLY
WARNING
Ensure power supply is disconnected while
setting up this product
Check that product is in table saw position,
and that flip over catch(6) is engaged
Ensure saw blade is fully lowered by rotating
cut height adjustment stub(10) with
adjustment tool.
Do not lift the machine using the table. Use
the carrying bars; the table is not designed to
bear the weight of the machine.
With two persons, lift the machine at the front
and rear, using the lifting bars, out of the
packing. Check all parts are present and intact.
Lay out all parts and check them against the
product familiarisation list.
The machine can be operated with the legs(3)
for the work stand or with the four mounted
plastic feet.
Push the legs into the available mounts.(Fig.1)
Fully tighten the legmount socket screws and
leg locking handles(Fif.2)
Fix the two stabilizing bolts(8) into the
appropriate cut outs in the saw stand. Ensure
that fixing nuts are tightened.
WARNING!
Before using mitre saw, attach safety protective
cover(25) to saw table （1）as shown in fig 4
and fig 5
*Engage plastic tags
Fig.1
*Rotate screw to clamp securely into position
Fig.2
Fig.3
Fig.4
Fig.5
Publicité
Table des Matières
