dirna Bergstrom bycool green line KIT SLIM FIT Instructions De Montage page 20

SLIM FIT
EN
7
Place the equipment on the hatch plate
ensuring the base studs coincide with the
holes on the hatch plate. Tighten with (4) M8
flat washers and (4) self-locking M8 nuts.
8
Remove (4) screws from the interior air
distribution panel and leave the latter attached
to the cables.
9
Stick in channelling duct attachment supplied
as shown and insert it back into the interior air
distribution panel.
9
7
8
9
20
®
7