dirna Bergstrom bycool green line KIT SLIM FIT Instructions De Montage page 19

SLIM FIT
4
Place in the hatch plate (12) hex nuts L = 35
and (4) hex nuts L = 90 to fasten the console.
5
Place the hatch plate on the top of the cab and
tighten with (12) M8 torx screws with toothed
washers and flat washers.
6
With the plate attached to the cab, thread 10
mm (4) M8 studs into the base of the Slim.
On them insert a (1) rubber washer, (1) flat
washer and (1) nut. Press against the base.
6
(2) L=90
4
5
6
19
®
(12) L=35
(2) L=90
EN