Start Up; Conveying Interruption; Motor Control Lamp; Washing - Whirlpool AGB 788/WP Manuel D'emploi

MANUAL FOR USE
GB

START UP

By pressing the start-up button (3), the wash pumps and conveying bar will begin ope-
rating. Rinsling takes place automatically as the baskets are conveyed along.

CONVEYING INTERRUPTION

If required, the conveying bar movement can be interrupted by setting the selector (7)
in the STOP position.

MOTOR CONTROL LAMP

Any malfunction of the motors located insidethe dishwasher will cause the indicator (2)
to light up.

WASHING

Before putting the tableware in the dishwasher, remove any solid or oily residues.
Failure to do so not only results in an increase in detergent consumption, but also
notably jeoparadises the quality of the wash. If the tableware has been witing a long
time to be washed, it will first to be soaked.
After having arranged the tableware in the basket, push the basket toward the entrace
of the machine. The conveying bar will automatically make it advance. Do not open the
door rapidly when the machine is operating.

END-TRAVEL SAFETY PROVISION

When the baskets are not removed, they continue onward until they contact the end-tra-
vel microswitch which automatically stops the bar movement and turns off the rinse
water. When the microswitch interrupts the conveying bar movement, turn off the machi-
ne before removing the cause of the stoppage.

TURNING OFF THE MACHINE

To turn off the machine, whenever required or when the work has been completed,
press button (2) located on the control panel.
28