Operation; Control Panel; Conveying Speed - Whirlpool AGB 788/WP Manuel D'emploi

SIMBOLS
Temperatura boiler
TŁmperature chauffe-eau
Boller temperature
Temperatura boller
Temperatura vasca lavaggio
TŁmperature bac de lavage
Temperature wash tube
Temperatura recipiente de
1 Ve l o c i t
1Łre Vi t e s s e
1st Speed
1 Velocidad

OPERATION

IMPORTANT
Before starting up the machine, make sure:
- The wall switch is turned on.
- The inlet water valves are open.
- The overflow tubes are located correctly.
- The filters are well located.
- The doors are closed.
- The brightener and detergent containers are full and their respective dosing units are
working properly.

CONTROL PANEL

To turn on the machine, turn the selector switch (1) clockwise to the START will turn on
and the basins will start to fill with water. When they are full, lamp (3) will turn on. The
electrical resistances will then automatically heat the water in the wash basins, the tem-
perature of which will be shown by the digital thermometers (9-10) mounted on the con-
trol panel.
CONVEYNG SPEED
Select switch (7) position (*) or (**) according to the conveying speed required for the
type of dirt being removed and the type for objects being cleaned.
MANUAL FOR USE
2 Ve l o c i t
2Łme Vi t e s s e
2nd Speed
2 Velocidad
Pulsante di marcia
Bouton de mise en
marche
On button
Interrutore acceso
Interrupteur allumŁ
On switch
Interruptor encendido
GB
Interruttore spento
Interrupteur Łteint
Off s w i t c h
Interruptor apagado
27