en
Interior fittings
You can reposition the shelves inside the
appliance and the door shelves as
required:
Lift the glass shelves, pull forwards,
■
lower and swivel out to the side.
Fig. 4
Reposition stoppers and re-insert
■
shelf. Fig. 5
Lift the door shelf and remove.
■
Fig. 6
Special features
(not all models)
Pull-out container
Fig. 7
The pull-out container is especially
suitable for the storage of foods which
contain meat. It can be taken out for
loading, unloading and cleaning.
Vegetable container with cover
Fig. 8
The vegetable container can be taken
out for loading, unloading and cleaning.
Bottle holder
Fig. 9
The bottle holder prevents bottles from
falling over when the door is opened and
closed.
28
Ice cube tray
Fig. *
1. Fill the ice cube tray ¾ full of water
and place in the freezer compartment.
2. If the ice tray is stuck to the freezer
compartment, loosen with a blunt
implement only (spoon-handle).
3. To loosen the ice cubes, twist the ice
tray slightly or hold briefly under
flowing water.
Sticker "OK"
(not all models)
The "OK" temperature monitor can be
used to determine temperatures below
+4 °C. Gradually reduce the temperature
if the sticker does not indicate "OK".
Note
When the appliance is switched on, it
may take 12 hours until the temperature
is reached.
Correct setting